Front and back hole deburring in one pass. Select material and blade configuration, then match the holder by pilot hole or by thread and validate inclined / tube geometry. All data is the NOGA MT UBURR Technical Center source data and works offline.
Standard pilot range Ø2.5–<Ø25.5 mm (0.098–<1.004 in)
Material condition
43 of 43 source conditions
Source cutting data
Material
Non-alloy steel and cast steel, free cutting steel · <0.25% C
Condition
Annealed
AISI / DIN
1020 / 1.0044
Blade configuration
HSS coated
Cutting speed Vc (source)
45-65 m/min · 100-165 sfm
Feed per revolution (source)
0.08-0.20 mm/rev · 0.003-0.008 ipr
Feed after stability (Stable × 1)
0.08–0.2 mm/rev
Chip former
ML / PL
Coolant
Air / Wet
Source cutting speed is never modified by stability — only feed is.
Technical center
All calculated values are starting recommendations based on NOGA MT source data. Validate on the actual application, machine and fixture.
